LTE7460-M608,LTE B1/3/7/8/20/38/40,WCDMA B1/8, Standard,EU/UK Plug,FCS, support CA B1+B3 The Zyxel LTE7460-M608 4G LTE-A Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better ...
Cena: od 10827,- Kč, Hlídat cenu
LTE7460-M608,LTE B1/3/7/8/20/38/40,WCDMA B1/8, Standard,EU/UK Plug,FCS, support CA B1+B3 The Zyxel LTE7460-M608 4G LTE-A Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP65 outdoor hardware designed for harsh environments. No matter you have a router device or not, the LTE7460-M608 can be easily deployed and integrated into your existing environment. You can set LTE as your main connection or use LTE as a backup when performance of the main connection drops. The LTE7460-M608 is good for any venue like suburban areas, public locations, homes and offices. Enjoy LTE technology with minimum effort with the LTE7460-M608. State-of-the-art technology The Zyxel LTE7460-M608 4G LTE-A Outdoor Router employs 3GPP Release 10, Category 6 – the best-practice LTE technology with 300/50 Mbps (DL/UL) data rates through carrier aggregation approbation. It also supports 3G/2G networks with the up-to- date “Dual Carrier HSPA+ (DC-HSPA+)” technology with 42/5.76 Mbps (DL/UL) data rates. You can enjoy ultra-fast, flexible wireless connection anywhere within the LTE/3G/2G signal coverage. Embedded bridge/router mode adapts to all kinds of devices/gateways For better network integration, Zyxel embeds both bridge and router modes into the LTE7460-M608. While users can take advantage of the built-in routing functions in all typical applications, the bridge mode is designed to work with users’ existing or preferred devices such as high-end Wi-Fi Access Points, Small Business Gateways or Enterprise Gateways. With the two built-in modes, the Zyxel LTE7460-M608 can be easily integrated with all kinds of devices/gateways. Built-In multi-band antenna Zyxel’s LTE7460-M608 4G LTE-A Outdoor Router provides multi-band embedded antennas of up to 7 dBi that work effectively in outdoor environments. The outdoor-friendly design makes it possible to work in near non-line-of-sight conditions where desirable signal strength was difficult to achieve. Software upgrades over-the-air Through the LTE radio interface, the Zyxel LTE7460-M608 supports TR-069 has full over-the-air configuration and software upgrade capability through events triggered by the operators. Non-stop connectivity with LTE 2nd WAN for fail-over Multi-WAN fail-over relieves the risk of network outage caused by dependence on single-WAN technology. Even better, LTE is wireless so you can get the second WAN without an additional cabling plan. As long as the gateway supports “multi-WAN fail-over”, you can just connect the Zyxel LTE7460-M608 to the existing gateway and set LTE as the fail-over WAN. IP Networking Support IPv4/IPv6 dual stack (NDP IPv6) DHCP Server ICMP supported Bridge/Router mode supported Virtual Private Network (VPN) pass through Network Address Translation (NAT) Traversal Support NAT/NAPT Support DMZ Support port forwarding Support ALG Support DDNS IP Firewall DoS Attack Prevention Support SPI Application-Level Firewall (LAN to WAN such as FTP, HTTP, Telnet, Ping) Management Support Local/Remote Web management and web online firmware upgrade Support TR069 and TR069 remote firmware upgrade SMS management APN/PIN management PIN/PUK management Network selection Network preference Operating frequency band selection (support Cat 4 only) LTE Interface Standard compliant: 3GPP Release 10 Category 6 Supported frequency: Band LTE 1/3/7/8/20/38/40 LTE TDD 2300/2600 MHz LTE FDD 2600/2100/1800/900/800 MHz Carrier aggregation configuration: B1+B3*, B1+B7* B1+B1, B1+B8, B1+B20 B3+B3, B3+B7, B3+B8, B3+B20 B7+B7, B7+B8, B7+B20 B38+B38, B40+B40 FDD LTE peak data rate: 300 Mbps DL within 40 MHz bandwidth (CA) 50 Mbps UL within 20 MHz bandwidth TDD LTE peak data rate: 224 Mbps DL within 40 MHz bandwidth (CA) 10 Mbps UL within 20 MHz bandwidth) UMTS/EDGE/GPRS/GSM Air Interface Standard compliant: WCDMA Rel’99 and Rel’10 DC-HSPA+; GSM/GPRS/EGPRS Rel’99 Supported frequency: UMTS band 1/8 EDGE/GPRS/GSM band 2/3/5/8 DC-HSPA+ downlink data rate up to 42 Mbps HSUPA uplink data rate up to 5.76 Mbps UMTS data rate up to 384 kbps EDGE data rate up to 236.8 kbps GPRS data rate up to 85.6 kbps Antennas 2 embedded antennas of up to 7 dBi Power Specifications Standard 802.3 af power over Ethernet Power consumption at jack: < 10 W Physical Specifications Dimensions (WxDxH): 254 x 255 x 58 mm Weight: 1.1 kg The mounting kits Environmental Specifications IP65 Enclosures Operating Environment Temperature: -40°C to 60°C (-40°F to 140°F) Humidity: 5% to 95% (Non-condensing) Storage Environment Temperature: -40°C to 70°C (-40°F to 158°F) Humidity: 5% to 95% (Non-condensing) * Supports to B1+B3 and B1+B7 are only available on LTE7460-M608-EU01V2F and LTE7460-M608-EU022F
Můžeme vás informovat o každém poklesu ceny nebo až v momentě, kdy cena klesne pod vámi zadanou úroveň. Zasílání zpráv můžete kdykoliv zrušit prostřednictvím odkazu, který je součástí každého informačního emailu.